Request Information Download PDF Configure Output Connector
GTM96605-GEN2-T2 GTM96605-GEN2-T2
Adaptive USB Power Supply/Quick Charger for Medical and ITE applications for USB PD2.0/3.0 Applications
Information
Model NumberGTM96605-GEN2-T2
DescriptionGTM96605-GEN2-T2, Adaptive Power USB Source, ITE/Medical, 60601-1-4th Ed. , Desktop/External, USB Adaptive Power Supply AC Adaptor, , Input Rating: 100-240V~, 50-60Hz, IEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8"), Output Rating: 60 Watts, 3.6, 5, 9, 12,15, 20V in 0.1V increments, Approvals: CE PSE WEEE VCCI RoHS 2 China RoHS Level VI Double Insulation
Agency Documents
CE EC-Declaration for MedicalContact GlobTek for more information
CE EC-Declaration for Industrial/Commercial/ITEhttp://globtek.force.com/models/ec_declaration?id=a0O0c00000PGI8DEAX
RoHS/RoHS3 Declarationhttp://www.globtek.com/pdf/rohs_cert/a0O0c00000PGI8DEAX
REACH Declarationhttp://www.globtek.com/pdf/iso_certificates/REACH.pdf
Conflict Minerals Declarationhttp://www.globtek.com/pdf/conflict-minerals.pdf
Model Parameters
TypeDesktop/External
TechnologyUSB Adaptive Power Supply AC Adaptor
CategoryAdaptive Power USB Source, ITE/Medical
Input Voltage Range (V)100-240V~, 50-60Hz
Max Input Current (A)1.5A
Max Output Power Rating (W)60
Output Voltage Range (V)3.6, 5, 9, 12,15, 20
EfficiencyVI
Ingress Protection
Size (mm)
EnclosureUser-added image
Rating Table
Model Number Output Voltage/Current Levels Available RFQ
GTM96605-GEN2-A1-T2
5V/3A, 9V/4A, 12V/4A,15V/4A and 20V/3A (high current)
RFQ
GTM96605-GEN2-A2-T2
5V/3A, 9V/3A, 12V/3A,15V/3A and 20V/3A (standard current)
RFQ
SpecificationsOUTPUT CAPABILITIES:
Following communication formats supported: USB PD 2.0/3.0, QC 2.0/3.0, QC 4.0/4.0+
OUTPUT PARAMETERS for USB2.0/3.0 Applications
Communications: Using CC1 pin on USB type C connector
Initial Output State: 5V/2A
Advertised PDO Voltages/Currents rating:
      -A1 option: 5V/3A, 9V/4A, 12V/4A,15V/4A and 20V/3A (high current)
      -A2 option: 5V/3A, 9V/3A, 12V/3A,15V/3A and 20V/3A (standard current)
Permanently attached, 1.5M Length, 20 Gauge with shield power cable

OUTPUT PARAMETERS for QC2.0/3.0 Applications
Communications: Using D+ and D- pins on the USB type C connector
Initial Output State: 5V/2A
HVDCP Class B Output Voltages/Currents rating:
      D+             D-                          Output
      0.6V         GND                      5V/3A
      3.3V         0.6V                      9V/4A
      0.6V         0.6V                      12V/4A
      3.3V         3.3V                      20V/3A
      0.6V         3.3V                      Continuous Mode, adjusts from 3.6V to 20V in 200mV steps
Permanently attached, 1.5M Length, 20 Gauge with shield power cable
A) GENERAL ELECTRICAL SPECIFICATIONS:
01. Input Voltage: Specified 90-264 Vac, Nameplate rated: 100-240Vac
         90-264 Vac range @ 100% of rated load current
         85-264 Vac range @ 85% of rated load current
         110-370 VDC range @ 100% of rated load current
02. Input Frequency: Specified 47-63 Hz, Nameplate rated 50-60Hz
03. Output Regulation: +/- 5% measured at the output connector
04. Line Voltage Regulation: +/- 0.5% typical measured at full load
05. Green Power On Indicator LED
06. Output Ripple (Vp-p):100 mV, measured at 20 MHz bandwidth with 0.1 uf ceramic capacitor in parallel with a low impedance 47 uf electrolytic capacitor connected at the end of the output connector
07. Turn-ON/OFF Overshoot: 5% maximum, 1 mS typical recovery time for 40% to 70% step load
08. Turn-ON Delay: 1 second maximum @ full load, nominal line
09. Hold-Up Time: 8 mS typical @ nominal input voltage and full load
10. Inrush Current: 30A/60A maximum cold start @ 115/230Vac input
11. Efficiency: Compliant with Efficiency Level VI and CoC Tier 2 standards
12. No Load Standby Power: <0.075 W @ 230Vac  

B) PROTECTION
01. Input Protection: Input line fusing and 300Vac MOV
02. Short Circuit/ Overload: Electronically Protected unit will auto recover upon removal of fault
        Output Current Limit: less than 120% to 130% of rated output current
03. Output Over-Voltage: 25Vdc max

C) SAFETY
01. Dielectric Withstand Voltage: 4000Vac or 5656Vdc from input to output,
On Class I models, 3000Vac or 4242Vdc from input to earth
02. Earth Leakage Current: Class I models < 300uA, N/A for Class II models
03. Touch Current: Class I models < 20uA, Class II models < 75uA
04. Output Floating or Earthed option for Class I models.
05. Earth Continuity Test: < 0.1 Ohm between Earth Pin at AC input and PCB termination point (Class I models only)
06. Means of Protection: 2 x MOPP
07. Compliant Standards: See listings at end of this drawing for specifics

D) EMC
EN 60601-1-2, 4th edition
Emissions, per EN 55032, EN 61000-6-3, EN 61000-6-4
  Conducted Emissions: Class B, FCC Part 15, Class B
  Radiated Emissions: Class B, FCC Part 15, Class B
Line Frequency Harmonics EN61000-3-2, Class A
Voltage Fluctuations/Flicker EN61000-3-3
 
Immunity, per EN 55024, EN 61000-6-1, EN 61000-6-2
  Static Discharge Immunity EN61000-4-2, 10kV Contact Discharge, 20kV air discharge
  Radiated RF Immunity EN61000-4-3, 10V/m 80-1000MHz, 3V/m 1-2.7GHz, 80% 1KHz AM.
  EFT/Burst Immunity EN61000-4-4, 4kV/100kHz.
  Line Surge Immunity EN61000-4-5, 2kV differential, 4kV common-mode
  Conducted RF Immunity EN61000-4-6, 3Vrms, 80% 1KHz AM
  Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m
  Voltage Dip Immunity EN61000-4-11, Criteria

E) OTHER:
01. MTBF: 300,000 Hours @ 25°C ambient temperature
02. Operating Temperature: -10°C to 40°C ambient temperature at full load, -10°C to 50°C ambient temperature with derating to 80% load
03. Operating Humidity: 0% to 95% relative humidity, non-condensing
04. Storage Temperature: -30°C to 80°C
05. Operating Altitude: 5000 Meters
06. ROHS 2: Complies with EU 2011/65/EU and China SJ/T 11363-2006

F) ENCLOSURE
01. Housing: High impact plastic, 94V0 polycarbonate, non-vented
02. Markings: Label or Laser Printed
03. AC Input mechanical options: Desktop C6, C8, C14 or C18 IEC Inlet.
       Hybrid option (Desktop or Wall Plug-in) Class I or Class II input

G) SPECIAL OPTIONS
01. Analog Programmed output voltage adjustment, any 3 wire output connector
02. Detachable USBc Output Cordset (contact factory for availability)
03. Custom Markings, and Marking methods
04. Special Housing Colors and Cordset Colors
05. USB Micro B connector at end of cordset for QC2.0/3.0 applications.
Derating CurveUser-added image
Qty (ea.)/Carton20
Individual Box/Gift Box Size (mm)Egg Crate
Individual Box/Gift Box Color
Master Carton Size (mm)427 x 405 x 158
Gross Weight (kg)15.6
Label Width (mm)
Label Height (mm)
Input Configuration
DescriptionIEC 60320/C8 AC Inlet connector, Class II, Non-Earth Ground (aka "Figure-8")User-added image

Mates with IEC 60320/C7 Plug

Standard International IEC 320/C7 Cordsets

Below are standard cordsets which are "not included" (unless stated above); these may be purchased separately or packaged with the power supply. Please contact your Sales Engineer if the style required is not shown below. Many more available in different lengths, colors or cable material.

 
Conductors (No Ground) IEC 320/C7 (Figure "8")
Part NoCountryEnd AEnd BLength
4511116F703A(R)N. AmericanNEMA 1-15PIEC 320/C71830
5014112M703A(R)AustralianAS 3112IEC 320/C72000
4533501M8703(R)ChinaGB 2099.1IEC 320/C71830
2074112M703A(R)EuropeanCEE 7/16IEC 320/C72000
451J3401M8703(R)JapanJIS 8303IEC 320/C71830
2044112M703A(R)KoreaKS C 8305IEC 320/C72000
4033401M8703A(R)TaiwanCNS 10917IEC 320/C71800
6104112M703A(R)UKBS1363IEC 320/C72000
Output Configuration
Common output connector options:
Click to add to your request.






L Type (Coaxial 5.5x2.5mm plug) C Type (Coaxial 5.5x2.1mm plug) K Type (Coaxial 3.5x1.3mm plug) LL Type (5.5x2.5mm Locking 760k type) CL Type (5.5x2.1mm Locking S761k type) Magnetic Connector






YL3 Type (KPPX-3P) YL4 Type (KPPX-4P) EJ1/2/3/4/5 (EIAJ RC-5320A type connectors) MSB Type (Micro USB) USBC Type (USB Type C) Inquire for custom design

For a comprehensive list of options, click here

Contact GlobTek for your specific requirements or custom solutions.

Approvals
LogoDescription
User-added image  CE Certification
User-added imageCHINA SJ/T 11364-2014, China RoHS Chart: http://en.globtek.com/globtek-rohs.php
User-added image

Double Insulation - Mark is on the label or Molded in the case
 User-added image
 
Efficiency: complies to section 301 of Energy Independence and Security Act (EISA) complies with Energy Star tier 2 (North America), ECP tier 2 (China), MEPS tier 2 (Australia), Code of Conduct (Europe)
User-added imageJAPAN TUV Rheinland-PSE GlobTek Inc to J60950-1(H26) , J55022(H22),J3000(H25).Please follow the procedure listed in the following link for proper import to Japan: http://en.globtek.com/importing-to-japan.php.
RoHSSpecifications of directive 2011/65/EU Annex VI (ROHS-2) with amendment 2015/863-EU (ROHS-3) http://www.ce-mark.com/Rohs%20final.pdf
User-added imageJapan: Voluntary Control Council for Interference (VCCI)
 User-added imageWEEE: Complies with EU 2012/19/EU (http://ec.europa.eu/environment/waste/weee/index_en.htm) Mark is on the label or Molded in the case
Popular Products
SKUVolts OutCurrent Out (Amps)Connector
5134505V, 9V, 12V, 15V, 20V3A, 4A, 4A, 4A, 3AUSB Type-C Connector

Richiesta informazioni